12 Best Laser Cutters and Engravers for Designs and Decorations in 2019

If you’re a fan of making designs and decorations, then you don’t need to cut or engrave it manually as primitively done. All that you have to do is connect a laser cutter or engraver into the computer and print it the way you like it. Paper is not necessarily an option for printing.

Nonetheless, presented to you in this review are 12 of the best laser cutters and engravers that you should purchase this 2018. For more details, just scroll below and find out for more.

Quick Comparison: Top 12 Best Laser Cutters

Laser Cutters	Image	Description
#1. TEN-HIGH 3020	Check Price	- Versatile Cutting and Engraving - Innovative Speed - Precise Operation - Durable Design - Temperature Sensitive
#2. SUNCOO 40W	Check Price	- Easy to Use - Affordable Price - Material Variability - Fast and Precise Operation - Multiple Image Formats
#3. TEN-HIGH 4040	Check Price	- Material Utilization Flexibility - Fast Operation - Easy to Use Interface - Wide Size Coverage
#4. Mophorn	Check Price	- Robustly Made - Portable - Cater Several Materials - Multiple Image Formats
#5. Orion Motor	Check Price	- Small and Portable Device - Allows Variety of Materials - Good Design - Cheap Price
#6. TEN-HIGH CO2	Check Price	- Easy to Use - Material Variability - Fast and Accurate Operation
#7. Mophorn	Check Price	- Cheap Price - Caters Variety of Materials - Fast and Precise Operation - Good Design - Quiet Operation
#8. TEN-HIGH	Check Price	- Durably Made Device - Very Fast and Accurate Operation - Diverse Material Coverage - Safe and Secure Utilization
#9. CNCShop	Check Price	- Material Variability - Cost-Efficient Price - Easy to Use
#10. Meterk	Check Price	- Innovative Design - Rechargeable - Portable and Lightweight - Cheap Price
#11. WER 1500mW	Check Price	- Easy to Use - Intuitive Operation - Cheap Price - Rechargeable Battery
#12. SUNWIN	Check Price	- Easy to Use - Durable Frame - Material Variability for Operation - Cheap Price

#1. TEN-HIGH 3020 12″x 8″ 40W 110V CO2 Crafts Laser Engraving Machine

View on Amazon

Enclosed with a 12’’ x 8’’ engraving area, this black finished with the white-topped machine is capable of engraving non-metallic variety of materials like bamboo, acrylic, glass, leather, and fabrics. This 35 kg device engraves and cuts accurately with an astounding speed of 600 m/s and precision of 0.01 mm.

Because operation does not happen in contact, it is expected that there is no stress or damage that will happen with the material itself. It engraves via sealed CO2 laser with existing power of 40W AC110V / 60Hz on it. Characters and letters applicable are only Chinese and English with optimal size and font as needed.

It is embedded with the HTK linear design and high-powered stepped motor for long-term and efficient operation. The system is equipped with temperature control and flame retardant system, readily adjust ate temperatures 0-45 degrees Celsius and 5-95% Humidity.

The package includes a laser cutter and engraver, a CD where the software is stored, a USB dongle, a manual, an exhaust fan and pipe for air circulation purposes, an air and water pump, a power cord, a USB cable, and a Focal Length Card.

Conclusion: Overall, this product is great. It does hold true to what its advertised and its price is really not that expensive for the same line of features. Though the device is entirely versatile, we just hope for an incorporation of metals on its operation. Also, it would be intuitive for engraving at multiple shapes specifically those rounded and cylindrical ones since this device does not cater it. But nonetheless, there is very few documentation for this product. It’s best to evaluate things readily as needed. You can also check out our list of the best CNC Routers for carving, milling, engraving and cutting.

#2. SUNCOO 40W CO2 Laser Engraving Machine Desktop Engraver Cutter with USB Port

View on Amazon

Accommodating an engraving area of 12x8in, this device incorporates a red housing streamlined with white on its sides. It has a rectangular shape with dimensions 10.25W x 8.75L x 2.85H in. The device caters a variety of materials including the wood, paper, leather, and cloth intuitively. Nonetheless, it has a resolution ratio of 0.001 in respectively.

The laser tube incorporating life hours of 1000-1300 hours is operated at 40 watts. It has an engraving and cutting speed of 0-13.8 in./s and 1.38 in./s respectively. It includes a 110 V power supply with stepper motor and water pump to regulate the operating temperature at 32-113°F.

SUNCOO CO2 Laser Engraver Cutter Machine has a USB port that you can connect to your laptop or desktop computer to control your arts and crafts easily. The device output is controlled via an innovative software including Corel Draw, and NewlyDraw. It supports multiple JPEG, BMP, and JPG image formats.

Conclusion: It’s an entry-level device, easily utilized with efficient engraving and cutting operation. It has a limited function yet totally reasonable for the price it makes. Most of the complaints with some of its users are mainly software issues. It’s difficult to manage since it’s not CorelDraw, though still learnable as intended. Aside from that, some users also received few scratches and dents as observed on the surface of the device.

#3. TEN-HIGH 4040 400x400mm 15.7×15.7 inches 40W 120V Crafts Laser Engraving Machine

View on Amazon

Weighing about 40 kg, this 900mmx700mmx250mm machine is employed with a glass cavity sealed CO2 laser that efficiently engraved any text, pattern, and design to a variety of materials such as plywood, glass, wood, acrylic, and other non-metallic materials.

It is simply operated with intuitive functions and controls with a maximum adjustable engraving accuracy and speed of 0.01mm and 0-600mm / s respectively. Nonetheless, it incorporates a high-speed DSP control and stepper motor high subdivision drive for its operation.

Aside from that, its platform caters a 400 x 400 mm processing format with a 40 mm thickness on its carving. The direct output of the device is done through the utilization of Corel Draw with a lift distance of 15 cm.

Aside from the device itself, the package includes a CD for the software installation, a USB Key, a small workbench, an exhaust fan and pipe, a user manual, an air pump, a power cord, a water pump, and a USB cable.

Conclusion: It’s a bigger model than the introduced latter device. Aside from the size feature, everything is quite similar between the two. Nonetheless, its function, efficiency, controls, and material capability are all the same. Indeed, there’s a limited documentation with this device. Consequently, looking at its price, everything with this device seems worth of having it.

#4. Mophorn Laser Engraving Machine 80W CO2 Laser Engraver 500 x 700mm Laser Cutting Machine

Currently unavailable

Mainly red finished, this 180 kg engraving machine is incorporated with dimensions of 1460 mm x 850 mm x 950 mm and two strong legs attached with 4 intuitive and smooth rollers below the device. It supports engraving of multiple materials on different textures such as wood, bamboo, leather, marble, and ceramics.

The Co2 sealed-off laser glass tube incorporates an 80 W laser power with an intuitive 1000 DPI resolution upon its application. Its platform caters a maximum cutting size of 700 x 500 mm with speed of 1000 mm/s and positioning accuracy at 0.01 mm. The machine has an offline system catering an English system and supporting multiple outputs such as CorelDraw and AutoCAD. The supporting figure format includes DST, PLT, BMP, GIF, JPEG, and others.

The package of the device includes a laser engraver software, a user manual, an industrial water cooling system, an air exhaust fan, an air pump, communication cable, 3 reflect optics, 1 focus optics, and 1 laser tube.

Conclusion: Generally, the product is a bit expensive with the highly efficient operation. As advertised, it truly works with wonders on engraving and cutting several materials. It’s quite versatile in numerous image formats. But nonetheless, some of its users have overheating issues upon using it for long hours. A helpful tip is to put a couple of ice to cool it down. Aside from that, the manual is a bit confusing and insufficient. It is advised to look through online to give you more information. Otherwise, the device is durable. Few users have been using the device for more than two years without malfunctioning.

#5. Orion Motor Tech 12″x 8″ 40W CO2 Laser Engraving Machine

View on Amazon

A 63-pound device generally coated with bright red and white on its main body. The top portion lies the main functions and controls of the device with indicating the switches, power, and current regulation of the device. It has a rectangular design with slightly inclined on its top. The rear of the device upon opening the slot situated a glass laser tube with a water inlet and outlet on it.

Upon opening its lid, lies the regular working area of the machine approximately measuring 12 inches x 8 inches in dimensions. It comes with a premium focal lens with a 40 W CO2 laser tube. Aside from that, it incorporates an engraving and cutting speed of 0-400 mm/s and 0-50 mm/s. respectively. It runs via a stepper motor with a 110 V power supply. It is capable of working variety of materials including wood, leather, acrylic, plastics, and even glass. It is compatible with a variety of software such as CorelDraw, Shenzhouyi, and Laser Draw. It supports multiple versions of Windows OS and easily connects through USB.

It operates at room temperatures 40 – 104°F and at humidity levels 5% – 95% without condensed steam. Aside from the device, the package includes an exhaust fan, venting tube, water pump, a USB key and cable, the software (not Corel Draw) and a manual.

Conclusion: An entry-level engraving and cutting machine that incorporates decent material quality and operation efficiency. Upon receiving the package, you’ll be having a hard time on installation since the user manual points out only with all its basics. Nonetheless, you could use Youtube or Reddit to help you out with things. Also, the software seems unreliable. It has a complicated interface. You really need to figure out things to use it. Though, you could buy intuitively Corel Draw as required. Overall, it’s a good device at a very cheap price. Though the engraving and cutting quality could be a bit off, everything seems totally fine with this device. Read more…

#6. TEN-HIGH CO2 40W 110V 300x400mm Laser Engraving Cutting Machine

View on Amazon

Ten-High’s another cutting machine weighing an approximate 60 kg mainly having an orange and white housing with rectangular-like 850 x 560 x 400mm dimensions. It has an intuitive interface on the top surface of the device with intuitive blue buttons and power switch on it.

It encloses an engraving area of 40 cm x 30 cm with a resolution ratio of 0.026 mm. The device incorporates a glass laser with CO2 gas on it. It encompasses a maximum of 40-watt power with AC110V / 60Hz. Aside from that, it empowers an engraving and cutting speeds of 0-30000mm/min and 0-3600mm/min respectively. The main output software for this device includes the CorelDraw intuitively.

Nonetheless, the device supports multiple non-materials for engraving and cutting. This includes acrylic, plywood, leather, and PVC. It features functions and controls such as red light positioning, temperature control, and flame retardant systems.

Aside from the laser engraving and cutting machine, the device includes a USB key, a software with CD on it, a double-sided adhesive, clamps, air and water pump, exhaust pipe, limit switch, a power cord, a focal length card, and a USB cable.

Conclusion: Another high five for Ten-high! This product is well-made with the manufacturer’s attempt at producing a less expensive brand to cater more the market. But nonetheless, it’s made from carbon mainly plastic as needed. It exhibits great operation, totally engraving and cutting several materials. But consequently, a lot of users have its issues with the software incorporated with it. Others even are noted with Trojan viruses while installing it. Aside from that, the manual is mainly in Chinese characters. For more information about this, contact first the manufacturer directly.

#7. Mophorn Laser Engraving Machine 40W CO2 Laser Engraver 300 x 200mm Laser Cutting Machine

View on Amazon

Incorporating an engraving area of 12″ x 8″ (200X300mm), this blue polished device induces a resolution ratio of 0.001 with engraving and cutting speed of 0-13.8 in./s (0-350mm/s) and 0-1.38 in./s (0-35mm/s) respectively. Its interiors include a 40 W laser CO2 tube that easily engraves different kinds of materials such as bamboo, leather, acrylic, and plastics.

Mophorn laser engraving machine operates through a stepper motor with water cooling that sets temperature conditions at 32-113F. Aside from that, it consumes power at a minimum of 250 watts at standard 110 V power supply with current from 0-22 mA. It is supported by a Corel Draw Software employed with a USB port.

Aside from the Laser Engraving Machine, the package of the device includes a smoke pipe and fan, water pump, power wire, a USB cable, a USB Key, an accessory bag, an instructional video, and a user manual.

Conclusion: A cheap engraving and cutting device that fits its indicated price. Nonetheless, a lot of its users are contented with using the device. There are just a few complaints with the user manual, not thoroughly explained as needed. It induces a quiet and stable operation. Though not really the best laser cutting and engraving machine available now, it is totally recommended on those who are starting and doing designs as a hobby.

#8. TEN-HIGH Upgraded Version CO2 400x600mm 50W 120V Laser Engraving Cutting Machine

View on Amazon

Strongly yellow finished, this laser engraving and cutting machine is empowered with large 40 cm x 60 cm engraving area and a 30 cm adjustable height. It operates through the utilization of the CO2 gas laser with a wavelength of 10.64 micrometers and a 50 W laser power.

It encloses an engraving and cutting speed with 0-30000mm/min and 0-3600mm/min respectively. It has a 0.026 mm resolution ratio easily monitored through the output software, CorelDraw. It is preferably utilized to a lot of non-metallic engraving or cutting applications in particular materials such as wood, leather, fabrics, and even glass.

Aside from that, the machine supports a Blowing Flame retardant system that is used to prevent burning during engraving process, communication interface, electric lift and temperature control system. This 120 kg device with a rectangular design and innovative legs, stands with dimensions of 1020 x 740 x 110mm.

Pre-installing the device, the package includes a laser engraving and cutting machine, a USB key, a CD where the software is kept, a double-sided adhesive, a clamp, an air and water pump, an exhaust pipe, two limit switches, a power cord, a focal length card, and a USB cable.

Conclusion: An upgrade from the two previous presented devices, this astounding product caters much bigger sizes exhibiting highly precise and fast engraving experience to any variety of materials such as wood, leather, and even metal coatings. It is strongly built with powerful features that also incorporates safety and security while utilization of the device. Nonetheless, in order to experience the quality, you’ll really need to spend almost double as the price of the latter devices in order get it.

#9. CNCShop Laser Engraving Machine – Laser Cutting Machine

View on Amazon

Having rectangular dimensions of 800 x 500 x 250mm, this blue and white polished device weighs about 60 pounds with an engraving area of 300 x 200 mm. It incorporates an engraving and cutting speed of 0-13.8 in./s and 0-1.38 in./s respectively.

Its interiors are mainly governed with a 40 W CO2 gas laser tubing that runs intuitively at 1000-1300 hours. It has an innovative 110 V power supply and 60 Hz frequency. It runs via a stepper motor with a water pump to control operating temperatures between 32-113F.

The device works through the CorelDraw software suitable to work on various materials including bamboo piece, organic plastic, paper, film, canvas, and crystals. The package of the device includes a CO2 LASER Engraver, a Water Pump, a Smoke Pipe and a Smoke Fan, a Power Wire, a USB Cable, a USB Key, an Accessory Bag, an Instruction Video and an English User Manual.

Conclusion: An entry-level engraving machine that has features totally close to its price. It cuts and engraves intuitively and works well through multiple materials as advertised. Though you’ll be having a difficult time with installation, most texts are written in Chinese. Aside from that, to keep things operated efficiently, you’ll necessarily to replace some of its cheaply made parts like the exhaust and air assist. The software installation and usage are okay. You’ll just need to get used to it and practice to master it.

#10. Meterk Laser Engraver Printer 1500mW Portable Household Art Craft

View on Amazon

Professionally built with a stainless steel frame, this 42 x 42 x 78 mm mainly black polished device incorporates a 6000 mAh polymer Li-ion battery with an intuitive 3 hour operating time upon needed. When undercharged, the device is powered by a 5 V USB charger.

It includes a replaceable laser with a minimum wavelength of 405 nm. Nonetheless, it could be used on etching variety of materials including wood, plastic, and leather It is important to remember that it does not cut metals as needed.
Aside from that, it has a software that is compatible with Windows and Android 4.0 supporting multiple language formats such as English, German, Japanese, and Italian. It is compatible with different image formats such as jpeg, bmp, png, and pcx. It allows a maximum of image size 550×550 pixels.

The package of this device includes an engraving machine, a laser protective glasses, an allen wrench, a micro USB cable, a CD, and a user manual.

Conclusion: A one of a kind engraving and cutting machine that incorporates multiple features that any premium machines does not have. First of all, it has a charging feature for which other devices lack. Aside from that, you could connect the device to your phones. But nonetheless, the device has few weaknesses. It really does not engrave as intuitively as it should be. Also, the software is a bit difficult to walk through. Overall, the device has its potential to develop. It’s quite cheap yet reliable enough for utilization.

#11. WER 1500mW Miniature DIY Laser Engraving Machine

View on Amazon

Occupying a carving space of 42 x 42 x 78 mm, this device is enclosed with an acrylic frame and a hollowing center interface of the device. This 1.097 kg device supports 405 nm Blue-violet laser engraving and decorating through a variety of materials including wood, rubber, plastic, and leather.

It incorporates a polymer Li-ion battery with 6000 mAh capacity that operates for 3 hours as needed. The machine requires 1500 MW supporting Windows and Android devices. It also supports Bluetooth devices with images 550 x 550 high-resolution print.

Conclusion: Overall, the device works intuitively as dictated by its price. It’s easy to use and innovative with its rechargeable battery operation. Aside from that, it runs as needed not just to computers but also to phones. It also works well with multiple surfaces except for glass and metal. But nonetheless, the device is quite slow with less quality as to premium and known engraving machines. Thus, this device is cheap yet worth still for the price it is made from.

#12. SUNWIN 40X50CM 12V USB Desktop Laser Cutting/Engraving Machine

View on Amazon

Measuring with dimensions of 56 x 44 x 16 cm, this device has a simple design mainly framed with high-quality aluminum, acrylic, and stainless steel screws all around the device. It powers with two Y-axis 42 stepper motors and a 2 axis USB standard control panel. It has a 12 V power supply with 5.5 W.

It incorporates a 500 mW laser power at 12 V high power laser module. It has a software that is easily installed on your laptop or computer. It supports through Windows 7,8,10, XP and 2000. It can be carved through a variety of materials like wood, paper, plastic, and leather.

Aside from the device, the kit includes a protective glasses and a set of instructions.

Conclusion: Overall, it’s a good beginner device for engraving and cutting. It empowers with user-friendly controls and sturdy frame for utilization. But nonetheless, a lot of its users have the difficulty in assembling the device itself. Instructions are prettily awful. Aside from that, the software is limited and buggy as needed. Thus, it’s an intuitive device for a cheap and affordable price.

p.s: If you are looking for the vinyl cutters instead of laser cutters, then visit this page.