If you like to put life back into your favorite music while driving, you will need new car speakers. To improve or upgrade your car’s stereo speaker, you have to replace your car speakers with the best 6×8 car speakers to get the full experience with music on the go.

Right now there are so many brands available in the market, and it is quite overwhelming to choose the right one. Don’t worry because we have compiled the best 6×8 inch car speakers today to help you make an informed choice. Let’s get started now!
Lsit of the Best 6×8 Car Speakers
#1. JBL GTO8629 Premium 5×7 / 6×8 Inches Co-Axial Speaker
The JBL GTO8629 Premium Co-Axial Speaker measures 5×7 inches or 6×8 inches GTO Series and 2-Way Car Speakers. The power handling per pair has a peak of 360 watts and an RMS of 120 watts. This speaker is powerful with a carbon-injected cone and with a frequency response of 49 to 21,000 Hz. It means that you don’t need to provide any extra power because of its patented woofer-cone technology.
The JBL GTO car speakers are considered the perfect upgrade to any existing speakers. Because these speakers were engineered and developed with a cone material that is carbon-injected, accurately reproducing music the way artists and singers originally desired and intended. They are equipped with three-ohm voice coils, allowing the speaker to work at an efficient 4 ohms after being powered. This will allow them to use every watt of power for stability. The product dimension in 10 by 8 by 9 inches.
Conclusion: These speakers feature a high thermal-capable voice coil because of its vented magnet, effectively dissipating heat, thus ensuring the longevity of a consumer’s investment. The speaker cones are edge-driven, allowing greater sound levels within the same amount of power. With wide frequency responses, these speakers leave a very satisfying sound while you are playing your favorite songs.
- Sounds good
- Great value
- Clean and clear
- No grill installation instructions
#2. Pioneer TS-A6886R 6″ x 8″ 4-Way Speaker
The Pioneer TS-A6886R is a 4-way speaker that has a maximum power of 350 watts. It has been designed with a multi-layer of Mica Matrix Cone for superior sound production. You’ll enjoy listening to your favorite music with cleanliness and clarity. It has a lightweight and elastic polymer surround.
The Pioneer TS-A series next generation of speakers provides a very dynamic range, higher power handling, improved bass, and unmatched cosmetic design. These amazing speakers are specifically designed to replace the speakers that are factory-installed, producing improved sound quality at a relatively great value. The structure has a deeper bass resulting in a wider dispersion of sound. The new tweeter is designed to deliver an impressive range of mid to high frequencies, producing optimized sounds at higher volumes. With the improvements in technology, it offers better performance, with enhanced sound quality as well as the ability to play a wide array of popular music. The music you can play without issues also includes heavy basses such as hip hop, alternative rock, and dubstep.
Conclusion: The Pioneer TS-A6886R 4-Way Speaker can bring sounds to life like distinctive details such as the musician’s movement, stage size, and aural reflection. It is rigid and lightweight for a clear and responsive sound.
- Great sound
- Easy to install
- Clean and clear highs
- Quick upgrade
- Not much bass
#3. Rockford Fosgate Punch P1683 6 x 8-Inches Full Range 3-Way Speakers
The Rockford Fosgate Punch Full Range 3-Way Speakers has a FlexFit basket design with OEM adapter plate, PEI dome tweeter, and overall impressive design. The maximum power handling is 130 watts. Another feature is the mineral-filled and polypropylene injection molded cone with butyl rubber surround. This is to ensure superior sound quality with a clean and crisp sound.
If you are a fanatic of a great sounding speaker, you can replace your factory-installed speakers because you got the Rockford Fosgate. These Rockford Fosgate 6×8 speakers are compatible with factory speaker locations that are oddly shaped. It is also compatible with Integrated Concealed Crossover or ICC which eliminates mounting black boxes.
Conclusion: Whether you are looking for a whole component speaker system or a just simple pair of coaxes, the Punch speakers can make your ride so sounding sweet. You have 15 models to choose from. The Flex-Fit frame uses slots rather than single screw sized holes, allowing a slight adjustment of the speaker when it is mounted.
- Clean and clear audio
- Great quality
- Feels rock solid
- Unaligned fastener holes
#4. Enrock Kicker Metra 6×8″ Inch 2-Way Car Coaxial Stereo Speaker
This package includes 2 sets or a total 4 aftermarket speaker system. The Kicker’s 43CS684 6×8 inches speaker set that provides a low-end with polypropylene woofer having a polyester foam surround. The balanced dome tweeter (1/2 PEI ) takes care of the instrumental and vocal details that can really bring music to life. The speakers sound great because they are also powered by an aftermarket car stereo or a factory radio.
These speakers will really rock when they’re connected to an external amplifier. You can always plug these speakers into a factory connector available in your vehicle so the installation is simple and easy. It has an Enrock speaker wire that is 16g high-quality for free with a length size of 50 ft 16 gauge for a more convenient installation process.
Conclusion: The company offers a 100% money-back guarantee. Buy the Kicker 6×8 speaker with confidence and find a good value for your money.
- Sounds great
- Crisp and clear mids and highs
- Great value
- Easy to install
- Connector issue
#5. Infinity KAPPA 682.11cf 6″x8″/5″x7″ Two Way Car Audio Speakers
The Infinity KAPPA Two Way Car Audio Speakers measures 5×7 inches or 6×8 inches with hi-roll and reliable rubber surround. The dome tweeter is 1-inch edge-driven with a power range between 5 to 100 watts RMS up to 300 watts peak power.
The frequency response is 40-25,000 Hz. The package comes with one pair of 6″x 8″ car speakers that can also fit varying 5″x7″ applications. Each Infinity speaker is 75 RMS with powerful and clean sound. Now, you can enjoy playing your favorite songs while driving!
Conclusion: The Infinity KAPPA Two Way Car Audio Speakers offer a great value with the best features and qualities. These speakers provide the driver and passengers clean and crisp sound or music every time. Infinity KAPPA is one of the best 6×8 speakers with reasonable price.
- Sounds amazing
- Very clear and crisp sounds
- Good quality
- Expensive
#6. JVC CS-V6837 6X8″ 3-Way Coaxial Car Speaker
The JVC 6×8″ 3-Way Coaxial Speakers have been engineered and designed with powerful sound with bold looks. It can match any vehicle interior because of its modern design with a hybrid surround. The speakers reproduce sounds with a distinctive response, superior clarity, and high efficiency. It means that you do not need tons of power just to hear your music clear and loud.
These speakers have 250 watts peak and 30 watts RMS. They are equipped with Poly-Ether Image or PEI tweeter or mid-range. The superior sound is caused by the carbon mica cone, producing unmatched crisp and cleanliness.
Conclusion: With JVC CS-V6837 3-Way Car Speaker, you can enjoy traveling with very good music even for hours or long-distance.
- Excellent sound
- Affordable
- Highs are perfect
- Need wire harness
#7. Kenwood KFC-C6895PS 6×8″ Oval Custom Fit 3-Way Speaker
The new Kenwood KFC 3-Way Car Speaker is Oval Custom Fit with a maximum power of 360 watts and an RMS power of 85 watts. Be impressed with its impedance of 4 ohms and 6×8 inches paper cone woofer. You can custom fit the speaker for easy mounting. The product dimensions are 6.7 x 5.9 x 3.1 inches.
Many customers are impressed with the Kenwood KFC-C6895PS 3-Way Speaker. It hits the highs instantly and easily. The mids are recommended for country songs and even rock. Although there no so much bass, you can use a dedicated subwoofer.
Conclusion: The price for these speakers are great. All the necessary mounting and instructions are easy to follow. They have an excellent sound even with low watts of the head unit. It is one of the best 6×8 speakers for bass in your car. Customers are completely satisfied.
- Great Sound
- Perfect for trucks
- Great vocal clarity
- Require adapters
#8. Pyle PL683BL 6×8 inches Car Sound Speaker
The frequency response of Pyle three-way sound speaker system is between 70 Hz to 20 kHz. It has a magnet structure of 40 oz with a 1-inch neodymium film dome frequency response and mid-range. This car speaker is packed with an exceptional 91dB decibel sensitivity. The car speaker includes a 4-OHM impedance, compensating the undersized wire which is found in many cars today. The blue poly injection cone has a great look, allowing your music to fully resonate with superior power.
These speakers have a 1′-inch ASV voice coil. The Pyle car sound speaker system’s ASV voice coil has the capability of 1-inch high-temperature. It increases the efficiency and performance of heavy-duty playtime because of higher operating temperatures and lower weight. The peak handling is 360 watts and the RMS is 180 watts due to its 40 oz of the magnet structure.
Conclusion: The Pyle car speaker has a clear and loud sound, which carefully combines just to produce a clear sound and outstanding responsiveness. Your speakers are kept secure with the butyl rubber sound, thus extending the product’s lifespan.
- Economical
- Clear and crisp sound
- Easy to install
- Above-average mids
- Low bass distortion
#9. Kicker 40CS684 6×8 inch 2-Way Speakers
The Kicker 40CS684 6×8 speakers are easy to install and they sound great. Obtain the capacity of these speakers with a small amp. The Kicker is true to their name and the recorded material is crisp and clean. They sound fantastic even when you are traveling long distances.
Get the best value for your money with the Kicker 40CS684 2-Way Speakers (6×8 inches). You’ll love playing your favorite songs whether they are rock, country, or alternative. It is well-built matching any car’s interior.
Conclusion: You can invest in these speakers with full confidence because of their great value. While there seems no improvement from previous versions, the quality says it all.
- Easy to install
- Great sound
- Good value
- No improvement
#10. Alpine Spr-68 6×8 Inch Car Speakers
The Alpine Spr-68 6×8 Inch 2-Way Car Speakers come in a pair with a peak of 600 watts and an RMS of 200 watts.
The speakers sound great and expect great durability and longevity. Expect a more enjoyable ride or driving by listening to your favorite songs using these Alpine 6×8 speakers.
Alpine speakers are made of good quality materials to ensure good sound quality. The music played is realistic with clean and crisp sounds. You’ll surely realize this is a good investment at a reasonable price.
Conclusion: These speakers are decent given the price point, providing crisp and clear sounds.
- Clean and crisp
- Powerful
- Easy to install
- Longevity issue
More: Other Buying Guide to The Best Bicycle Speakers & Motorcycle Speakers for Travelers to Enjoy Music On The Move.
Buying Guide to 6×8 Car Speakers
Now, you can match your speakers to your current speakers. These are the important things you will need to consider when choosing 6×8 car speakers.
1. Sensitivity
It measures the sound a car speaker yields obtained from the power that is applied to it. High-sensitivity rating speakers that are over 90 dB would be perfect to replace a low-powered car stereo having 15 watts of RMS per channel or even less. For a high-powered system having 16 watts of RMS or more, you need to choose low-sensitivity speaker ratings. These are usually provided by aftermarket external amplifiers or stereos.
2. Power-handling
The power-handling gives you an idea of how much power a car speaker can handle which is measured in watts. If you have a low-powered system, your car speakers do not necessarily need to handle so much power. If you have a powerful external amp system, it will need speakers with a power-handling closer to the amp’s output. The key specification in terms of power-handling is the maximum RMS power-handling and not peak power handling. The RMS ratings realistically measure the amount of power the car speaker can handle.
3. Types of Speakers
The main categories of speakers include component speakers and full-range speaker systems. Full-range speakers have all the elements of a speaker in a single basket. For the lows, they have a woofer. To produce highs, they have mounted a tweeter onto the woofer. Some models have extra drivers, such as mid-range or super-tweeter. If you want to replace your factory-installed speakers with less stress, you can opt for full-range speakers. These speakers come in different sizes that can be mounted easily into the locations of factory speakers. This is done by simply removing the old speaker, connecting the car speaker with a wiring harness, and then mounting it.
Component speakers use an excellent speaker design, giving you the best sound possible. A standard component system may include the following: separate woofers, external crossovers, and tweeters, working together. You can provide the best location for the imaging by mounting the separate woofer from the tweeter. Expect that the sound is more live and realistic with a greater depth. Component systems are usually made of higher quality materials as compared to their full-range counterparts, thus delivering a detailed sound and exceptional dynamics.
4. Speaker Materials
The material design of a speaker determines its sound quality and durability. The best material should be stiff to produce lower notes effectively. The manufacturers of car speakers usually use cones that are made of synthetic films such as polypropylene, which is mixed with other materials, including mica. This material is stiffer, thus yielding a bass response that is more accurate. Synthetics that are coated with titanium or aluminum and woven fabrics are also strong, lightweight, and provide a superior response, withstanding moisture, heat, and cold.
5. Tweeter Materials
The material of a tweeter has a huge effect when it comes to the type of sound produced. Tweeters are usually made of soft materials, such as poly, silk, or textile blends, giving a refined sound and something mellow. If you want bright highs and snappy sounds, you can choose tweeter made of hard materials such as graphite, ceramics, or metal.
6. Surround Materials
The materials for the woofer surround plays an important role, allowing the cone to freely move, emitting a bolder bass. It should be durable to withstand extremes of temperatures. Surrounds that are made of rubber provide excellent longevity and overall performance. Cloth and foam surrounds are more affordable with decent performance.
7. Other features
If you replace speakers low in the door, you can opt-in pivoting tweeters full-range speakers with a huge effect on the sound. Pivoting tweeters aim towards a higher sound stage for the listener. Expect a higher sense of depth with clear and crisp sound. Passive external crossovers can help in achieving a clean separation sent to the tweeter and woofer.
More: You may wish to check out other accessories for your car such as: speakerphones for handsfree call when driving, iPhone FM Transmitters for your car, or Bluetooth audio receivers for better wireless streaming.
Contents
- Lsit of the Best 6×8 Car Speakers
- #1. JBL GTO8629 Premium 5×7 / 6×8 Inches Co-Axial Speaker
- #2. Pioneer TS-A6886R 6″ x 8″ 4-Way Speaker
- #3. Rockford Fosgate Punch P1683 6 x 8-Inches Full Range 3-Way Speakers
- #4. Enrock Kicker Metra 6×8″ Inch 2-Way Car Coaxial Stereo Speaker
- #5. Infinity KAPPA 682.11cf 6″x8″/5″x7″ Two Way Car Audio Speakers
- #6. JVC CS-V6837 6X8″ 3-Way Coaxial Car Speaker
- #7. Kenwood KFC-C6895PS 6×8″ Oval Custom Fit 3-Way Speaker
- #8. Pyle PL683BL 6×8 inches Car Sound Speaker
- #9. Kicker 40CS684 6×8 inch 2-Way Speakers
- #10. Alpine Spr-68 6×8 Inch Car Speakers
- Buying Guide to 6×8 Car Speakers
3 comments
Nice sharing for how to install a subwoofer, amplifier and enclosure on the car or vehicle right location to perfect setting. It is a very helpful post for those who want to fix a subwoofer on their rider location.
Thanks a lot for sharing your incredible ideas. It is an appreciated and pretty tip for all those music lovers. What a Fatal post for those who want to upgrade an existing subwoofer with a new one.
I need a 6×8 component set with a nominal power of 150 or more
Comments are closed.